DPSS 266nm Q-switched Pulsed Deep UV Laser

Specifications: Model   SDL-266-QSL-XXXT Wavelength   266±1nm Output average power   50-300mW Transverse mode   Near TEM00 Operation Mode   Frequency conversion of Q-switched pulsed laser Single pulse energy   5~15μJ Pulse duration   ~15ns Peak power   ~450W Average power   Average power (mW) = Single pulse energy (μJ) * Rep. rate (kHz) Ave power stability after warm-up   <1%, <3%, <5% (over 2/4/8 hours) Warm-up time   <15minutes Beam parameters   Elliptical (4:1), Beam spot ~2mm Beam diameter at the aperture   ~2mm Polarization ratio   >100:1 Point stability after warm-up   <0.05mrad Dimensions of Laser head   330 × 140 × 125mm Power supply   SDL-PS-800 Dimensions of power supply   300 × 162 × 134mm Expected Operating Lifetime   8000 hours Warranty time 1 year Note: See the Glossary and Technology for information about the terms used In the front of the laser, we add an infrared filter. The residual IR part is less than 10-3. Please refer tothe technology page for more information about the filter. Other Sytles and custom designs are available. Contact us to discuss your needs.

* Detailed Laser Head and power supply info of each power version will be provided on request.

* 4 or 8 hours Longer operation period output power stability are available on request.

* Better (<3%,<1%) power stability are available on request.

* Other version Laser Head and power supply are available on request.

* Analog Modulation >2KHz or higher as option.

* Up to 30Khz TTL modulation on request.

* High frequency AOM modulation on requested.

* Line output version are available on request.

* Fiber coupled system is available on request.

* Longer warranty on request.

* Other custom-made design is available, please contact us for details.