DPSS 532nm Low Noise Laser
|
|
|
Specifications:
|
|
Model
|
SDL-532-LN-XXXT
|
|
Output Power @ 25 ℃
|
4000~10000mW
|
| Wavelength |
532nm
|
|
Operation Mode
|
CW, near TEM00
|
|
Beam height from base plate (mm)
|
93.5mm
|
|
Linear Polarization
|
>100:1
|
|
Beam Diameter at the aperture
|
~4.0mm
|
|
Beam Divergence (1/e2, Full Angle)
|
<2.0mrad
|
|
Power Stability after warm-up
|
<1%, <3%, <5% (over 2/4/8 hours)
|
|
M2 factor
|
<2.0mm
|
|
Warm-up time
|
<10 minutes
|
|
Dimension of laser head
|
333 x 140 x 125mm
|
| Power Supply |
SDL-PS-800
|
|
Dimension of Power Suply
|
300 x 162 x 134mm
|
| Input Voltage |
90-264VAC, 50/60Hz
|
|
Modulation
|
TTL Modulation >5KHz or analog Modulation >2KHz
|
|
Operating Temperature
|
10℃～35℃
|
|
Expect life time
|
10000 hours
|
| Noise of amplitude (rms, 1~20MHz) |
<1%
|
| Warranty time |
1 year
|
|
| Note: |
 |
See the Glossary and Technology for information about the terms used |
|
In the front of the laser, we add an infrared filter. The residual IR part is less than 10-3. Please refer to the technology page for more information about the filter. |
|
Other Sytles and custom designs are available. Contact us to discuss your needs. |
|
* Detailed Laser Head and power supply info of each power version will be provided on request.
* 4 or 8 hours Longer operation period output power stability are available on request.
* Better (<3%,<1%) power stability are available on request.
* Other version Laser Head and power supply are available on request.
* Analog Modulation >2KHz or higher as option.
* Up to 30Khz TTL modulation on request.
* High frequency AOM modulation on requested.
* Line output version are available on request.
* Fiber coupled system is available on request.
* Longer warranty on request.
* Other custom-made design is available, please contact us for details.
