DPSS 532nm Single Longitudinal Mode Laser

Specifications: Model SDL-532-SLM-XXXT Output Power @ 25 ℃ 1W~10W   Wavelength 532nm Operation Mode CW Longitudinal mode Single Transverse mode TEM00 Beam height from base plate (mm) 24. 8mm Linear Polarization >50:1(45 degree) Beam Diameter at the aperture ~2. 0mm Beam Divergence (1/e2, Full Angle) <1.5mrad Power Stability after warm-up <1%, <3%, <5% (over 2/4/8 hours) M2 factor <1.2mm Warm-up time <15 minutes Dimension of laser head 142 x 73 x 46mm Power Supply PS-300 Input Voltage 90-264VAC, 50/60Hz Coherent length (m) >50M Dimension of Power Suply 130 x 120 x 62mm Operating Temperature 10℃～35℃ Expect life time 10000 hours Warranty time 1 year

Note: See the Glossary and Technology for information about the terms used In the front of the laser, we add an infrared filter. The residual IR part is less than 10-3. Please refer to the technology page for more information about the filter. Other Sytles and custom designs are available. Contact us to discuss your needs.

* Detailed Laser Head and power supply info of each power version will be provided on request.

* 4 or 8 hours Longer operation period output power stability are available on request.

* Better (<3%,<1%) power stability are available on request.

* Other version Laser Head and power supply are available on request.

* Analog Modulation >2KHz or higher as option.

* Up to 30Khz TTL modulation on request.

* High frequency AOM modulation on requested.

* Line output version are available on request.

* Fiber coupled system is available on request.

* Longer warranty on request.

* Other custom-made design is available, please contact us for details.