DPSS 1064nm Single Longitudinal Mode Laser
 |
|
|
|
Specifications:
|
|
Model
|
SDL-1064-SLM-XXXT
|
|
Output Power
|
1-10000mW
|
|
Wavelength
|
1064nm
|
|
Operation Mode
|
CW, TEM00 , Single Longitude Mode
|
|
Beam Diameter at the aperture
|
~2.0mm
|
|
Power Stability after warm-up
|
<1%, <3%, <5% (over 2/4/8 hours)
|
|
Noise of amplitude
|
<0. 5% (rms, 1~20MHz)
|
|
Beam Divergence (1/e2, Full Angle)
|
<1.5mrad
|
|
Spectra Linewidth
|
<0.0001nm
|
|
Point Stability after warm-up
|
<0.05mrad
|
| M2 factor |
<1. 5
|
| Beam height from base plate (mm) |
24. 8mm
|
| Coherent length (m) |
>50M
|
|
Dimension of laser head
|
142 × 73 × 46mm
|
|
Power Supply
|
SDL-PS-300
|
| Input Voltage |
90~264VAC, 50/60Hz
|
|
Operating Temperature
|
10℃～35℃
|
|
Dimensions of power supply
|
133 × 130 × 62mm
|
| Warm-up time |
<15 minutes
|
| Polarization ratio |
>50:1(45 degree)
|
| Expected Lifetime (hours) |
10000 hours
|
| Warranty time |
1 year
|
| Note: |
 |
See the Glossary and Technology for information about the terms used |
|
In the front of the laser, we add an infrared filter. The residual IR part is less than 10-3. Please refer tothe technology page for more information about the filter. |
|
Other Sytles and custom designs are available. Contact us to discuss your needs. |
|
|
|
|
|
* Detailed Laser Head and power supply info of each power version will be provided on request.
* 4 or 8 hours Longer operation period output power stability are available on request.
* Better (<3%,<1%) power stability are available on request.
* Other version Laser Head and power supply are available on request.
* Analog Modulation >2KHz or higher as option.
* Up to 30Khz TTL modulation on request.
* High frequency AOM modulation on requested.
* Line output version are available on request.
* Fiber coupled system is available on request.
* Longer warranty on request.
* Other custom-made design is available, please contact us for details.
