DPSS 473nm Single Longitudinal Mode Laser

Specifications: Model SDL-473-SLM-XXXT Output Power 1-100mW Wavelength 473nm Operation Mode CW, TEM00 , Single Longitude Mode Beam Diameter at the aperture < 1.5mm Power Stability after warm-up <1%, <3%, <5% (over 2/4/8 hours) Noise of amplitude <1% (RMS, 10Hz - 20MHz) Beam Divergence (1/e2, Full Angle) <1.5mrad M2 factor <1.5 Spectra Linewidth <0.0001nm Point Stability after warm-up <0.05mrad Dimension of laser head 142 × 73 × 46mm Power Supply SDL-PS-300 Input Voltage 85~250VAC, 50/60Hz Operating Temperature 10℃～35℃ Dimensions of power supply 130 × 120 × 62mm Warm-up time <15 minutes Polarization ratio >100:1 Expected Lifetime (hours) 10000 hours Warranty time 1 year Note: See the Glossary and Technology for information about the terms used In the front of the laser, we add an infrared filter. The residual IR part is less than 10-3. Please refer tothe technology page for more information about the filter. Other Sytles and custom designs are available. Contact us to discuss your needs.

* Detailed Laser Head and power supply info of each power version will be provided on request.

* 4 or 8 hours Longer operation period output power stability are available on request.

* Better (<3%,<1%) power stability are available on request.

* Other version Laser Head and power supply are available on request.

* Analog Modulation >2KHz or higher as option.

* Up to 30Khz TTL modulation on request.

* High frequency AOM modulation on requested.

* Line output version are available on request.

* Fiber coupled system is available on request.

* Longer warranty on request.

* Other custom-made design is available, please contact us for details.