DPSS 523nm Laser

Specifications: Model   SDL-523-XXXT Output Power @ 25 ℃   1-100mW Wavelength   523±1nm Operation Mode   CW, TEM00 Power stability after warm-up   <1%, <3%, <5% (over 2/4/8 hours) Warm-up time   < 10 minutes M2 factor   <1. 2 Beam Divergence (1/e2, Full Angle)   < 1.5mrad Beam diameter at the aperture   ~2.0mm Beam height from base plate (mm)   24. 8mm Polarization ratio   >100:1 (0 or 90 degree) Point stability after warm-up   <0.05mrad Operating temperature 10℃～35℃ Dimensions of Laser head   142 × 73 × 46mm Power supply   SDL-PS-300 Input Voltage   90-264VAC or 5V DC Modulation TTL Modulation or Analog Modulation Expect life time   10000 hours Warranty time   1 year Note: See the Glossary and Technology for information about the terms used In the front of the laser, we add an infrared filter. The residual IR part is less than 10-3. Please refer to the technology page for more information about the filter. Other Sytles and custom designs are available. Contact us to discuss your needs.

* Detailed Laser Head and power supply info of each power version will be provided on request.

* 4 or 8 hours Longer operation period output power stability are available on request.

* Better (<3%,<1%) power stability are available on request.

* Other version Laser Head and power supply are available on request.

* Analog Modulation >2KHz or higher as option.

* Up to 30Khz TTL modulation on request.

* High frequency AOM modulation on requested.

* Line output version are available on request.

* Fiber coupled system is available on request.

* Longer warranty on request.

* Other custom-made design is available, please contact us for details.