DPSS 532nm Laser

Specifications: Model SDL-532-005F SDL-532-010F SDL-532-030F SDL-532-050F Output Power @ 25 ℃ >5mW >10mW >30mW >50mW Operating Current <450mA <500mA <550mA <600mA Operation Mode CW @ 532nm, TEM00 Linewidth <0.1nm Beam Diameter at the aperture <1.2mm Beam Divergence (1/e2, Full Angle) <1.2mrad Power Stability after warm-up <±10% (over 2 hours) Point Stability after warm-up 0.05mrad Warm-up time <15 minutes Dimension of laser head 65 x 30 x 30mm Power Supply SDL-PS-900 Input Voltage 85~250VAC, 50/60Hz Modulation TTL Modulation >5KHz or Analog Modulation >2Khz Operating Temperature 10℃ ~ 30℃ Dimensions of power supply 100 x 80 x 30mm Beam Roundness >95% Expect life time >5000 hours Warranty time? 1 year   Note: See the Glossary and Technology for information about the terms used In the front of the laser, we add an infrared filter. The residual IR part is less than 10-3. Please refer to the technology page for more information about the filter. Other Sytles and custom designs are available. Contact us to discuss your needs.

* Detailed Laser Head and power supply info of each power version will be provided on request.

* 4 or 8 hours Longer operation period output power stability are available on request.

* Better (<3%,<1%) power stability are available on request.

* Other version Laser Head and power supply are available on request.

* Analog Modulation >2KHz or higher as option.

* Up to 30Khz TTL modulation on request.

* High frequency AOM modulation on requested.

* Line output version are available on request.

* Fiber coupled system is available on request.

* Longer warranty on request.

* Other custom-made design is available, please contact us for details.