1112nm IR Lasers
DPSS 1112nm Laser
|
|
||||
|
Model
|
SDL-1112-XXXT
|
|||
|
Output Power @ 25 ℃
|
1-600mW
|
|||
|
Wavelength
|
1112nm
|
|||
|
Operation Mode
|
CW, TEM00
|
|||
|
Power stability after warm-up
|
<1,<3%,<5% (over 2/4/8 hours)
|
|||
|
M2 factor
|
< 1.5
|
|||
|
Warm-up time
|
< 10 minutes
|
|||
|
Beam divergence (1/e2, Full Angle)
|
< 1.5mrad
|
|||
|
Beam diameter at the aperture
|
<2.0mm
|
|||
|
Polarization ratio
|
> 50:1
|
|||
|
Point stability after warm-up
|
<0.05mrad
|
|||
| Operating temperature |
10℃～35℃
|
|||
|
Dimension of laser head
|
142 × 73 × 46mm
|
|||
| Power Supply |
SDL-PS-300
|
|||
|
Dimension of power supply
|
130 × 120 × 62mm
|
|||
|
Modulation
|
TTL Modulation >5KHz or analog Modulation >2KHz
|
|||
|
Expect life time
|
10000 hours
|
|||
| Warranty time |
1 year
|
|||
|
|
|
 |
 |
|
| Note: | |
 |
See the Glossary and Technology for information about the terms used |
|
In the front of the laser, we add an infrared filter. The residual IR part is less than 10-3. Please refer to the technology page for more information about the filter. |
|
Other Sytles and custom designs are available. Contact us to discuss your needs. |
* Detailed Laser Head and power supply info of each power version will be provided on request.
* 4 or 8 hours Longer operation period output power stability are available on request.
* Better (<3%,<1%) power stability are available on request.
* Other version Laser Head and power supply are available on request.
* Analog Modulation >2KHz or higher as option.
* Up to 30Khz TTL modulation on request.
* High frequency AOM modulation on requested.
* Line output version are available on request.
* Fiber coupled system is available on request.
* Longer warranty on request.
* Other custom-made design is available, please contact us for details.