Diode 915nm Laser

Specifications: Model SDL-915-LM-XXXT Output Power @ 25 ℃ 1-500mW   Wavelength CW 915±3nm Operation Mode TE00 Linewidth <0.1nm Linear Polarization >50:1 Beam Diameter at the aperture 5.0-8.0mm Beam Divergence (1/e2, Full Angle) < 5mrad Power Stability after warm-up <1%, <3%, <5% (over 2/4/8 hours) Wavelength stability < 0.5nm Warm-up time <5 minutes Dimension of laser head 102 x 39 x 39mm Power Supply SDL-PS-200 Input Voltage 85~250VAC, 50/60Hz Point stability after warm-up <0.05mrad Modulation TTL Modulation >5KHz or analog Modulation >2KHz Operating Temperature 10℃～35℃ Dimensions of power supply 174 x 75 x 40mm Expect life time 10000 hours Warranty time 1 year

Note: See the Glossary and Technology for information about the terms used In the front of the laser, we add an infrared filter. The residual IR part is less than 10-3. Please refer to the technology page for more information about the filter. Other Sytles and custom designs are available. Contact us to discuss your needs.

* Detailed Laser Head and power supply info of each power version will be provided on request.

* 4 or 8 hours Longer operation period output power stability are available on request.

* Better (<3%,<1%) power stability are available on request.

* Other version Laser Head and power supply are available on request.

* Analog Modulation >2KHz or higher as option.

* Up to 30Khz TTL modulation on request.

* High frequency AOM modulation on requested.

* Line output version are available on request.

* Fiber coupled system is available on request.

* Longer warranty on request.

* Other custom-made design is available, please contact us for details.