|
Introduce
UV
Lasers
Visible
DPSS Lasers
Visible Diode collimated Lasers
Infrared DPSS Lasers
914nm Infrared DPSS Lasers
914nm Lasers (100-500mW)
914nm Lasers (600-1200mW)
914nm Lasers (1500-2500mW)
914nm Lasers (3W-5W)
946nm Infrared DPSS Lasers
1030nm Infrared DPSS Lasers
1047nm Infrared DPSS Lasers
1053nm Infrared DPSS Lasers
1064nm Infrared DPSS Lasers
1086nm Infrared DPSS Lasers
1112nm Infrared DPSS Lasers
1319nm Infrared DPSS Lasers
1342nm
Infrared DPSS Lasers
Infrared Diode collimated Lasers
Low
Noise Lasers
Single
Longitude Mode Lasers
Q-switched / Pulsed Lasers
RGB
/ RG Lasers
Fiber Lasers
Laser Pointers
Laser Collimator
Laser
Scanner System
Laser
Accessory |
| 914nm DPSS Infrared Laser |
|
|
| Specifications:
|
|
Model |
SDL-914-XXXT
|
| Output
Power @ 25 ¡æ |
100~500mW
|
| Wavelength |
914¡À1nm |
| Operation
Mode |
CW, Near TEM00 |
| Beam height from base plate (mm) |
24. 8mm |
| Linear
Polarization |
>100:1(0 or 90 degree) |
Beam Diameter at the aperture |
~2. 0mm |
Beam
Divergence (1/e2, Full Angle) |
<1.5mrad |
Power Stability after warm-up |
<1%, <3%, <5%
(over
2/4/8 hours) |
M2 factor |
<1.2 |
| Warm-up time |
<10
minutes |
| Dimension
of laser head |
142 x 73 x 46mm |
| Power
Supply |
SDL-PS-100 |
SDL-PS-300 |
| Input
Voltage |
90-264VAC or 5VDC,
50/60Hz |
| Dimension
of Power Suply |
100 x 60 x 56mm |
130 x 120 x 62mm |
| Modulation |
TTL Modulation >5KHz or analog Modulation >2KHz |
| Operating
Temperature |
10¡æ¡«35¡æ |
| Expect life time |
10000
hours |
| Warranty time |
1 year |
|
| Note:
|
 |
See
the Glossary
and Technology
for information about the terms used |
|
In
the front of the laser, we add an infrared
filter. The residual IR part is less than
10-3. Please refer to the
technology page for more information about
the filter. |
|
Other
Sytles and custom designs are available. Contact
us to discuss your needs. |
|
|
|
|
